Fronius Personal Display Instrukcja Użytkownika Pobierz pdf (Strona 23)

Troubleshooting

General remarks

Troubleshooting

The display shows error messages if a fault or error occurs

- on a Fronius IG / IG Plus in the system

- on the personal display

If a Fronius IG / IG Plus in the system sends a service message, the personal display

will indicate it through its status LED, which will flash red.

To find out which inverter is affected:

- Press Enter key

- Use the left/right navigation arrows to scroll through the inverters in the system. The

status LED of any inverter displaying a service message will be steady red. The

display will also show the service code, which is also output on the Fronius IG / IG

Plus itself. Information on the service codes can be found in your Fronius IG / IG

Plus operating instructions.

The displayed service code can be confirmed and removed from the display by pressing

the Esc key.

Important The display can save up to 8 inverter errors. Confirming the service code by

pressing the Esc key will display the next service code, if any.

IG XX MISS / NO RF IG XX (Check RF following prompt)

Cause: Connection to inverter has been lost or is out of range.

Remedy: Check antenna connection.

Cause: No power supply to display card in the inverter

Remedy: Check AC connection of Fronius IG / IG Plus. Check fuse on display

card and change if necessary.

IG XX MISS / RF OK (Check RF following prompt)

Cause: Connection to inverter is OK. Power supply to inverter has been lost

on the DC side. After sunset the inverter disconnects itself from the

mains.

Remedy: Wait for sunrise.

Cause: Connection between Fronius IG / IG Plus and solar modules has

been lost

Remedy: Check connection between Fronius IG / IG Plus and solar modules.

Personal display does not find all Fronius IGs / IG Plus in „ADD IG“ search mode

Cause: The FRONIUS inverter have not been assigned unique numbers.

Remedy: Check numbers on the inverters and correct them if necessary.

Cause: FRONIUS IG / IG Plus is out of radio range.

Remedy: Check radio range

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Brak uwag

Fronius Personal Display Instrukcja Użytkownika Strona 23